Posts made in March, 2015

Transforming Your Kitchen Cabinets To Glass-Front Cabinets

Does your kitchen need a little sprucing up? Do you want to renovate your kitchen but have a very small budget to do so? Maybe, the solution to your low budget is transforming your upper kitchen cabinets to glass-front cabinets. Here, you will learn how to do just that.

Step1: Remove the Doors

Use a screwdriver to carefully remove the cabinet doors. Be careful as you do this so you don’t strip the screws holding the hinges in place.

Step 2: Remove the Center of the Doors

If your cabinet doors do not have a frame to follow, you will have to measure a perimeter to follow. If your cabinets have a center panel, simply remove the center panel. Use a router with a straight bit to cut out the center of the cabinet door.

Tip: If you don’t own a router, one can be rented at your local home improvement store.

Step 3: Create a Glass Mounting Lip

Use the router to cut a mounting lip for the glass panel you will be installing. The mounting lip is just a shallow lip cut into the edge of the opening so that the glass panel will sit flush with the rest of the cabinet door.

Step 4: Measure the Openings

Carefully measure the openings in your cabinet doors. These measurements need to be exact so that you can take them to have glass panels cut for your cabinet doors. For the most accurate results, measure each door at least twice to ensure your measurements are precise.

Step 4: Get the Glass

Your local home improvement store likely offers a glass cutting service. Simply take your measurements with you to the store and give them to the cutting technician.

Step 5: Install the Glass

Run a thin bead of clear silicone caulk around the edge of the door on the mounting lip. Carefully place the glass panel in place. Use a drill to pre-drill holes to mount door stiles and rails to hold the glass panel in place. Use clear mirror clips to ensure the glass panel stays in place.

Step 6: Hang the Doors

Get some help hanging your cabinet doors on the cabinets. You do not want to drop the door that you have just worked to refinish.

Step 7: Finish the Project

Well, your project is technically finished, but you have the option of doing a little extra to the glass to give the kitchen a little more detail. You could etch patterns into the glass or use stained glass applique kits to add color to the room. This step is optional and up to your creative side.

Not sure that you can complete this project? Talk with a local kitchen renovation contractor like Kitchen Village for assistance if you just don’t feel comfortable doing it on your own.

Read More

Tips For Keeping Rats Out Of Your Home

If you have a rat problem, one of the most important steps to take is to seal your house, so they can’t get inside. Otherwise, you’ll have to deal with rat traps or poison to remove them once they settle into your attic or other part of your home. Since rats carry diseases and give your home a bad smell, you don’t want them to get inside if at all possible. Here are some things you can do.

Find Their Paths

Rats are habitual creatures, and they follow the same paths most of the time. That causes them to leave trails behind that you can follow right to their nest and to where they enter your home. You may see a small trampled path in the weeds that leads to nesting places underground or in a brush pile. If you know where they live and sleep, you can wipe out the colony, or at least disrupt it, so the rats move off your property.

Rat trails on your house are usually easier to spot. You may see footprints or tail marks in the dust. There will be rat droppings and urine stains. If the rats use the same trail for long enough, greasy dark stains will develop on hard surfaces, such as drainpipes, that are a sure sign of a rodent infestation.

If you need help finding the rodent path, you can buy a UV light flashlight to shine along the roof and foundation of your home. This causes the urine to glow, so you can tell where rats have been. You can even buy cotton balls coated with fluorescent powder to leave around for the rats to find. When a rat makes contact with one, the rat will be coated in particles that glow under a UV light. This will help you find the nest and trails much easier.

Seal Your Home

Once you know where the rats get inside your home, you can begin sealing it. You may need to fill active holes with steel wool, or cover them with metal to keep the rats from gnawing them open again. Rats are very smart animals, and if they know food and shelter are inside your home, they will hunt for another way to get inside.

Therefore, you’ll need to go around your home and seal every possible entry point you can find. Look around window frames, examine your roof, and check for cracks in your foundation. Pay special attention to areas where pipes exit your home. Fill holes with caulk or something that is difficult for rodents to chew through. A simple screen probably isn’t enough to keep out a determined rat.

Once your home is sealed, you should visually inspect its perimeter every few weeks for signs of rodent tracks and trails. The rats may try to gnaw back inside, especially if it is cold outdoors and food supplies are low. It may be necessary to call an exterminator for help getting the rodents out of your yard. Although it’s frustrating to battle a rodent infestation, it’s much better to do it on the outside of your home rather than the inside. If rats move into your house, they can do a lot of damage before you get the problem under control.

For more information, contact Eagle Pest Eliminators or a similar company.

Read More

Three Tips For Preparing For The Professional Movers

There’s no doubt about it: moving is a chore. As if it wasn’t enough to decide to sell, find a new home, change the addresses, call the utilities, get home insurance transferred, and the countless other chores to do, there is still all of the packing and moving to be done. Professional movers like Midway Moving & Storage aren’t just experienced in moving your belongings from one home to another. Professional movers can also do the packing for you. If you choose that route, there is no preparation required. If you decide to pack on your own and have the movers transfer your items, here are three tips to prepare for their arrival on your moving day.

Pack properly

Since you are packing yourself, the movers can’t be held liable for damage inside the boxes due to poor packing. Wrap breakable items in paper carefully and use blankets or towels to fill in empty spaces. If you have some very expensive or irreplaceable items, consider moving those things yourself. The movers won’t know from the outside of a box that your great grandmother’s china is inside and it means the world to you.

Write it down

When packing up your boxes, remember to label them well. You can list all of the contents, or just a few of the larger items. But be sure to state clearly on each box the room in which it is to be transferred to in your new home. Make sure the movers have your correct new address, especially if there is more than one truck. They are very efficient, but it doesn’t hurt to double check that there hasn’t been a typo on their work order.

Be fully packed and prepared

It’s never a good idea to still be packing when the movers arrive. Have all of your boxes packed, labeled and arranged or stacked according to the room they will be moving into. Make sure there is plenty of room to walk through, even if that means shifting furniture. They need a clear path to get through from the furthest room to the front door. If you have them, use plastic runners to cover your carpet in high-traffic areas. But don’t throw down just any plastic; tarps and plastic covers not made for floors are a slip hazard.

It is also a good idea to separate boxes into the rooms they will go in. Movers will generally take boxes in the order they find them, so by organizing them properly, it will be easier when they are unloaded off the truck.  

Read More